Whats an Ideal Taper for Cyclists?

Q: Hey Gale—I'm wondering what's the difference between "tapering" for a race versus just resting a week or two? - Liz

A. Great question, Liz. Taper can be defined as a reduction in training with the goal of making the athlete sharp at the end of taper. The goal of sharpness is optimizing fitness for a stellar performance at an important race.

With that general definition in mind, let's first take a look at science, then at the practical applications for cyclists.

More: Priming the Pump: The Week Before Your Race

Types of Taper

Though taper can be defined as a reduction in training, the type of training reduction is not standard. The number of days of training reduction can vary between seven and 28.

Training volume and/or intensity can be reduced over the course of the taper. Training volume and intensity be changed independently. For example, overall training hours can be reduced, but the actual hours or minutes of intensity can remain constant. Or, both can be reduced at the same time, but perhaps at different rates. Taper rates can be linear, stepped or exponential.

More: Tapering to a Razor's Edge

Physiological and Performance Benefits of Tapering

In general, most scientists agree that when reducing training volume, it is best to keep some amount of intensity in the training. A good illustration of this principle is in a study on highly trained middle-distance runners. The study examined performance and physiological changes following three different taper techniques.

Nine male runners were randomly assigned to one of three different taper groups, following eight weeks of training. The groups included a high-intensity, low-volume taper (HIT), low-intensity, moderate-volume taper (LIT) and rest-only taper (ROT). After the first testing period, all runners resumed training for four weeks and completed a second taper—assigned to a different group. After the second taper, there was another four-week period of training and a third taper, with all runners assigned to yet a different group. This is important because each runner was subjected to all three methods of taper.

More: Overcoming the Taper Blues

The performance testing included a treadmill run to fatigue, with the treadmill speed set at the individual runner's best 1,500 meter time. Strength and contractile properties of the quadriceps muscles were measured before and after each taper. Muscle glycogen concentration, citrate synthase activity using needle biopsies, total blood and red cell volume were also measured.

Strength increased after all three tapers. Only after ROT and HIT did muscle glycogen increase. Interestingly, total blood volume increased significantly (statistically) after HIT—but—decreased after ROT. VO2max was unchanged by all three tapers.

Citrate synthase (considered a pace-making enzyme in the first step of the Citric Acid or Krebs Cycle) activity also increased significantly after HIT and decreased after ROT.

Finally the marker most athletes are concerned about, performance running time to fatigue, increased significantly after HIT (22 percent). Scientists noted that performance was considered unaffected by LIT (6 percent) and ROT (minus-3 percent).

Several studies look at the physiological changes of tapering and there is too much information to review in this column. One study worth mention found that tapering affected metabolic changes of the muscle at the single fiber level.

More: Rest: A Powerful Four-Letter Word

Detraining

Know that tapering without the appropriate training stimulus within the taper and detraining or a loss of fitness occurs. Without taper and holding training constant at a low to medium level, fitness increases cease and a performance plateau is reached. Holding training constant at relatively high levels risks overtraining and injury. Ever-increasing training loads, even at relatively small increases, will eventually result in overtraining or injury when the athlete reaches a breaking point.

Those that end up ill or injured usually lose significant amounts of valuable event preparation time due to recovery and rebuilding of fitness.

More: Hit Your Off-Road Peak With a Well-Planned Taper

What is the Optimal Taper?

The optimal taper time depends on the goal event or events, the volume and intensity of training preceding taper and individual response to tapering.

Practical Application and Rules of Thumb

I've coached a wide range of cyclists and triathletes. Goal event distances and finish times vary significantly from one hour to 17 hours in a single day. Some athletes race multiday events. Athlete level varies from beginner to professional. Weekly training hours vary from no more than five hours per week to around 30 hours.

More: How Much Does a Professional Train?

With all these athlete samples available to me, the answer for the best taper is...it depends. It depends on the items listed in "what is the optimal taper" and this is one reason why I give an athlete profile in all of my ready-to-use training plans online or in books.

That said, I can give you some general rules of thumb from the large number of successful athletes I've coached:

? If you are tapering training as part of a rest/recovery period (not for a specific race performance) during a training block, cut training volume by approximately 40- to 70-percent of the biggest week of training preceding the recovery week. Maintain some intensity in that week to equal to no more than 20-percent of the overall training volume as a starting point. Most of the time, it is best to include small amounts of intensity in training at least every other day. These time segments can be as small as 10 seconds and usually no longer than 20 minutes.

? Some cyclists need a rest/recovery period of seven days in normal training. Others do best on five. Still others feel best after 10 days of reduced volume. Life demands have as much, or more, to do with optimal recovery periods as training load.

? Cyclists training for a series of races over the course of five to six months may place races at the end of a recovery week as the majority of intensity for that week.

? Riders tapering volume for key events will typically have one, and no more than three, such events within a six to 10 month period where training is tapered for more than seven to 10 days.

? Cyclists doing longer single-day races that take over five hours or multi-day events, generally need more taper days than those doing one-day events lasting under three hours.

? For riders doing ultra events taking 10 to 24 hours, I will often use a 21-day taper. The taper takes two shapes. The first taper is a large training week followed by a rest week (the first seven days). Then there is a moderate volume training week (the second seven days) followed by a very low volume training block (usually five or six days) with the race at the end of the last week. The second shape is a large training week followed by a week that is roughly 80-percent of the volume (the first seven days) of the biggest week. The second seven days is roughly 50-percent of the volume of the biggest week and the final five or six days is around 20- to 30-percent of the biggest week with the race at the end of that week. Intensity during those periods is maintained at around 20-percent. Intensity levels are is the same as prior training. In other words, ultra racers don't practice criterium style sprints during taper.

More: How to Tell When You're Over-Reaching or Over-Training

Summary

Often when cyclists "rest" for a period of time, they reduce training volume and eliminate intensity making all training aerobic. In some cases cyclists completely eliminate multiple training sessions. We know this is not the optimal way to prepare for an important race.

When cyclists "taper" training for the affect of optimizing performance, then some race-level intensity is kept in training while overall training volume is decreased. I typically taper cyclists' training volume for some seven to 21 days, depending on the athlete profile. Race-specific intensity is kept in the plan, beginning at around 20-percent of overall training volume and then adjusted for specific athlete profiles.

More: 4 Things Successful Cyclists Do

Ready to ride? Search for a cycling event.

---

References:

Kubukeli Z.N., "Training techniques to improve endurance exercise performances," Sports Med. 2002;32(8):489-509.

Mujika I, et al, "Physiological changes associated with the pre-event taper in athletes," Sports Med. 2004;34(13):891-927.

Mujika I, et al, "Detraining: loss of training-induced physiological and performance adaptations. Part I: short term insufficient training stimulus," Sports Med. 2000 Aug;30(2):79-87.

Neary J.P., et al, "Effects of taper on endurance cycling capacity and single muscle fiber properties," Med Sci Sports Exerc. 2003 Nov;35(11):1875-81.

Shepley B, et al, "Physiological effects of tapering in highly trained athletes," J Appl Physiol. 1992 Feb;72(2):706-11.

Vollaard, N.B., et al, "Exercise-induced oxidative stress in overload training and tapering," Med Sci Sports Exerc. 2006 Jul;38(7):1335-41.