What setting for Speedy green spreader pulverized lime?

The ideal setting for the Speedy Green spreader when spreading pulverized lime varies based on the specific model of the spreader, the type and consistency of the pulverized lime, and the desired spread rate. Here are some general guidelines:

1. Application Rate: Determine the desired application rate for the pulverized lime. The rate is typically expressed in pounds or kilograms per 1,000 square feet (or per hectare). Refer to the instructions provided by the manufacturer of the pulverized lime for the recommended application rate for your specific purpose.

2. Spreader Calibration: Calibrate the Speedy Green spreader to ensure it is accurately applying the desired amount of pulverized lime. This involves setting the appropriate gate opening or spread pattern width and adjusting the speed at which the spreader is operated. Consult the spreader's user manual for instructions on calibration.

3. Start with a Low Setting: Begin by setting the spreader at a low setting, such as the minimum gate opening or the narrowest spread pattern width. This will help prevent over-application.

4. Test and Adjust: Spread a small amount of pulverized lime in a test area to observe the spread pattern and application rate. Adjust the spreader settings accordingly, either increasing or decreasing the gate opening or spread pattern width, until you achieve the desired spread rate.

5. Check Spread Pattern: Pay attention to the spread pattern of the pulverized lime to ensure uniform coverage. Adjust the spreader's settings if necessary to achieve even distribution.

6. Consider Material Consistency: The consistency of the pulverized lime can affect the spread rate. If the lime is very fine and powdery, it may spread more easily and require a lower setting on the spreader. Conversely, if the lime is coarser or has larger particles, it may require a higher setting to ensure proper spreading.

It is important to note that spreader settings can vary between different models and brands of Speedy Green spreaders. Always refer to the specific spreader's user manual or consult with the manufacturer for the recommended settings and instructions for spreading pulverized lime.