i have candle wax spilled on my outdoor and indoor carpet. How do I clean that up ?

Outdoor Carpet Cleaning

1. Scrape Off Excess Wax: Use a dull knife or credit card to gently scrape off as much of the wax as possible without damaging the carpet fibers. Be careful not to spread the wax further.

2. Blot with a Paper Towel: Place a clean, absorbent paper towel over the wax stain and press gently to absorb any remaining wax. Avoid rubbing, as this can spread the stain.

3. Apply Heat: Place a clean cloth or paper towel over the stained area and use a warm iron (set on medium heat) to apply heat to the wax. The heat will help to melt the wax and make it easier to remove.

4. Blot Again: While the wax is still melted, blot the stain with a clean paper towel to absorb the melted wax. Repeat steps 3 and 4 as necessary until the wax is completely removed.

5. Clean with Detergent: Once the wax is removed, clean the stained area with a mild detergent and water. Use a soft-bristled brush to gently work the detergent into the carpet fibers.

6. Rinse Thoroughly: Rinse the area thoroughly with clean water to remove any residual detergent. Blot the carpet with a clean cloth or paper towel to absorb excess moisture.

7. Dry the Carpet: Allow the carpet to dry completely before walking on it or replacing furniture.

Indoor Carpet Cleaning

1. Scrape Off Excess Wax: Use a dull knife or credit card to gently scrape off as much of the wax as possible without damaging the carpet fibers. Be careful not to spread the wax further.

2. Blot with a Paper Towel: Place a clean, absorbent paper towel over the wax stain and press gently to absorb any remaining wax. Avoid rubbing, as this can spread the stain.

3. Iron Method: Place a clean cloth or paper towel over the stained area and use a warm iron (set on medium heat) to apply heat to the wax. The heat will help to melt the wax and make it easier to remove.

4. Scrape Again: While the wax is still melted, use a dull knife or credit card to gently scrape off the melted wax. Be careful not to damage the carpet fibers.

5. Clean with Spot Remover: Apply a carpet spot remover to the stained area according to the product instructions. Use a soft-bristled brush to gently work the spot remover into the carpet fibers.

6. Rinse Thoroughly: Rinse the area thoroughly with clean water to remove any residual spot remover. Blot the carpet with a clean cloth or paper towel to absorb excess moisture.

7. Dry the Carpet: Allow the carpet to dry completely before walking on it or replacing furniture.

Note: If the candle wax has stained the carpet, you may need to use a specialized carpet stain remover or consult a professional carpet cleaning service. Always test any cleaning solutions on a small, inconspicuous area of the carpet before applying them to the entire stain.