How do you install artificial grass?

---

1. Site preparation:

- Remove all existing grass, plants, and debris from the area.

- Level the ground using a sod cutter or similar equipment.

- Compact the soil to create a firm base.

2. Lay down the weed barrier:

- Roll out the weed barrier over the prepared area.

- Secure it with staples or pins.

3. Add a layer of crushed rock:

- Spread a layer of crushed rock over the weed barrier.

- The rock should be about 1-2 inches thick.

4. Tamp the crushed rock:

- Use a tamper to compact the crushed rock.

- This creates a stable base for the artificial grass.

5. Roll out the artificial grass:

- Begin by rolling out the artificial grass along one edge of the area.

- Make sure the grass is oriented in the desired direction.

6. Trim the artificial grass:

- Trim the artificial grass to fit the area using a utility knife or scissors.

7. Secure the artificial grass:

- Use nails or staples to secure the artificial grass to the ground along the edges.

- Make sure the grass is pulled tight and there are no wrinkles or gaps.

8. Add infill material.

- Spread the infill material over the artificial grass.

- Use a broom or rake to work it in.

- Infill helps to keep the grass in place and prevents it from shifting or moving.

9. Water the artificial grass

- Lightly water the artificial grass to help settle it.

- This can remove residual dust and fibers.

10. Enjoy your new artificial grass!