Need assembly instructions for 3 room tent by vertical ascent?

Setup Instructions

1. Prepare the area by removing any rocks, sticks, or other sharp objects that could puncture the tent floor.

2. Spread the tent out on the ground, with the door facing away from the prevailing wind.

3. Insert the poles into the pole sleeves, starting with the center pole.

4. Secure the poles by attaching the guy lines to the stakes and tightening the tensioners.

5. Attach the rain fly to the tent, using the provided clips or hooks.

6. Stake down the rain fly, using the provided stakes and guylines.

7. Check all of the guylines and tensioners to make sure they are secure.

8. Open the door and windows of the tent to allow for ventilation.

Disassembly Instructions

1. Disconnect the rain fly from the tent.

2. Remove the stakes from the guy lines.

3. Disconnect the poles from the pole sleeves.

4. Fold the tent up, starting with the door end.

5. Secure the tent with the provided storage strap or bag.

Care and Maintenance

* To clean the tent, use a mild detergent and water. Do not use harsh chemicals, as they may damage the fabric.

* Allow the tent to dry completely before storing it.

* Store the tent in a cool, dry place, away from direct sunlight.

* Inspect the tent regularly for any signs of damage. If you find any damage, repair it immediately to prevent further damage.

Safety Tips

* Always use caution when setting up or taking down the tent.

* Avoid pitching the tent in strong wind or heavy rain.

* Do not use the tent near open flames or other heat sources.

* Keep the tent away from sharp objects that could puncture the fabric.

* Ventilate the tent regularly to prevent condensation.