Instructions to put together a Coleman laurel creek tent?

Step 1: Assemble the poles.

1. Take the two main tent poles and connect them together at the ends with the shock-corded poles.

2. Slide the other end of the poles into the grommets on the tent fabric, making sure that they are in the correct position (the poles are marked "A" and "B").

Step 2: Set up the tent poles.

1. Stand up the two main tent poles and insert them into the grommets on the tent floor.

2. Make sure that the poles are fully inserted and that the tent fabric is taut.

Step 3: Attach the guy lines.

1. Take the four guy lines and tie them to the grommets on the top of the tent poles.

2. Pull the guy lines taut and secure them to the ground with stakes.

Step 4: Attach the rainfly.

1. Place the rainfly over the tent and attach it to the four main tent poles with the clips.

2. Tie the guy lines on the edges of the rainfly to the stakes in the ground.

Step 5: Insert the poles for the front door.

1. Insert one end of the two door poles through the sleeve.

2. Insert the other end of the poles into the grommet on the tent fabric.

Step 6: Attach the awning poles.

1. Insert one end of the two awning poles into the grommets on the tent fabric.

2. Insert the opposite end of the awning poles into the grommets on the front of the rainfly.

3. Pull the awning poles apart and secure them in place.

Step 7: Stake the tent to the ground using the provided ropes and stakes.